TABLE OF CONTENTS Jan 2013 - 3 comments

What lies beyond the low-hanging fruit?

TEXT SIZE bigger text smaller text
By: James Menzies
2013-01-01

The trucking industry is about to step into a bold new age for fuel- and weight-saving technologies.

Let’s face it, all the low-hanging fruit has been harvested. Think of all the easy-to-deploy and inexpensive technologies that have become mainstream over the past five years in an effort to curb high fuel costs?

Wide-base tires are now commonplace, and so are trailer side skirts. Trailer tails will be too, once the government gets its act together and allows for their use.

All the truck manufactures have within their stables extremely aerodynamic tractors that slice through the air with ease. Even aerodynamic mud flaps are available.

The question becomes, what next? It seems all the obvious solutions have been developed, deployed, proven out and widely adopted. But fuel continues to be the highest operating cost for fleets and owner/operators.

It seems OEMs and component manufacturers are already working hard on the next generation of fuel-saving technologies.

One of the more promising technologies is waste heat recovery, which will allow the excess heat created by the engine to be captured and then used to power certain functions of the vehicle, decreasing the load on the engine.

Another intriguing technology is the use of 6x2 axles, which until recently would seem unthinkable in Canada, with our wintery conditions. However, advancements in electronics are making 6x2s a more compelling proposition, even here in Canada.

Fleets can save about 400 lbs by running a dead axle, increasing payload or improving fuel economy by more than 2%. This solution won’t work for everyone, but the 6x2 is a standard spec’ in Europe, including in some of the most rigorous applications.

Electronics can now shift the weight of the load onto the powered axle in low traction situations, automatically and transparently to the driver. I saw a demonstration of Meritor’s soon-to-be-released 6x2 SMARTandem this past month and was impressed by its capabilities.

Truck operators are going to have to get creative when it comes to ferreting out further fuel savings and productivity improvements from their equipment. Government needs to keep out of the way when some of these systems and technologies are brought to market, provided safety, infrastructure and environmental health aren’t put at risk.

As always, there is no magic bullet that will deliver double-digit fuel savings, but there are still plenty of opportunities for incremental improvements. Some of these emerging technologies, like 6x2 axles, will require fleet owners and owner/operators to take a leap of faith and abandon some of their preconceived ideas.

Stepping outside of our comfort zone and doing things differently than what we’re accustomed to is never easy, but it’s necessary to stay ahead of the game.

I, for one, am interested to see what the next big thing will be, now that all the no-brainers have been exhausted.


Monitor These Topics


Horizontal ruler

Reader Comments

Most recent firstOldest first

Craig Walters, Director of Sales, Escalate International Inc.

James,

We also believe that new technologies are the key to solving these challenges within the industry. We have recently been appointed the exclusive distributors of the Start FEED Unit (Fuel Efficiency and Emission Device) in North America.

The Start FEED unit is a patented device, which is in use and being tested all over the world. Our goal is to bring its benefits to North America. The Start FEED Unit applies a high-voltage electric current (at a specified frequency and wavelength) to break long-chain hydrocarbon molecules (at ambient temperature) into shorter, lighter more volatile molecules. Fuel that has been reconditioned by our unit burns more efficiently thereby reducing emissions, improving fuel economy and reducing engine wear.

In verified third party testing (i.e. ELASIS (FIAT Group) EPA city (FTP-75) and highway (HFET) test protocols), the Start FEED unit has been confirmed to provide double-digit increases in fuel mileage as well as reductions in CO (up to 72%), un-burnt hydrocarbons (up to 43%) and particulate matter (up to 73%). We’re also seeing such benefits as improved engine performance, easier ignition, prolonged engine life and the removal of existing carbon deposits in engines.

We are currently testing the Start FEED unit in trucks in country and are always looking for more candidates to help us confirm the results we are seeing elsewhere in the world. Based on your interest we are happy to keep you updated as to our progress and what we’re hearing from drivers in real-world environments.

If you would like more information, I encourage you (or anyone else) to contact me cwalters@escalateinternational.com or check out our website at www.escalateinternational.com.

Craig Walters
Director Sales, Escalate International Inc.
416-628-3471


Posted January 10, 2013 03:26 PM


Jonas Jones

By "aerodynamic mudflaps" I believe you are referring to Eco-flaps. Thank you for recognizing that our technology is part of the "low hanging fruit" solution to reducing fuel useage.We are also part of the safety solution as we are recognized for reducing blinding road spray.Eco-flaps are the most cost efficient way to positively impact your fleet today. I suggest your readers that haven't already retrofitted do so by contacting us. Just Google Eco-flaps.

Posted January 10, 2013 11:54 AM


Bruce Peck VP Business Development, Innovative Hydrogen Solutions

Hello James,

Actually there is a 'majic bullet' that delivers double-digit fuel savings. It's called the I-Phi (Innovative-Partial hydrogen injection) by Innovative Hydrogen Solutions - www.innovativehydrogen.com. As many are aware, there has been a lot of 'snake oil' sold in the hydrogen market sector. IHS has several 3rd party testing results that have proven huge reductions in fuel and emissions. Our end users are averaging 18-21% fuel savings & equal or greater reductions in NoX, PM and CO2.

Due to our technology being pre-combustion & hydrogen burning 14 times faster than diesel our 4 season electroliser has delivered some astounding results. We currently have an owner operator who have gone 3 yrs. without replacing an EGR and others who have gone 80,000 miles on the same oil, while saving 18+ % on their fuel.

Any fleet owner or owner operator will benefit significantly using our proven, reliable method of reduced fuel , maintenance and emission reductions.Be sure to check us out. With out us, you'll be out, "Out of pocket $$$" that is.

Bruce

Posted January 10, 2013 10:15 AM


FirstPrevNextLast
Horizontal Ruler

Post A Comment

Disclaimer
Note: By submitting your comments you acknowledge that Truck News has the right to reproduce, broadcast and publicize those comments or any part thereof in any manner whatsoever. Please note that due to the volume of e-mails we receive, not all comments will be published and those that are published will not be edited. However, all will be carefully read, considered and appreciated.

Your Name (this will appear with your post) *

Email Address (will not be published) *

Comments *



* mandatory fields