35 years’ experience, or one year’s experience 35 times?

Avatar photo

Where I live, commercial drivers are required to rewrite their CDL test every five years in order to renew the licence. I wrote my renewal test today and aced it. I wrote almost exactly the same test in 1978 when I first earned the privilege to drive big trucks.

Rewriting virtually the same test eight times over 35 years makes little sense. Despite all the discussion over the years that the test should be strengthened to demonstrate actual knowledge rather than a memory exercise following cursory re-reading of the drivers handbook the night before, most of the questions have not changed.

The written test consists of 55 questions: 20 on road signs, 20 on air brakes, and 15 on truck driving theory and practice. I’d be lying if I said that I didn’t like the fact the test was a cakewalk, but I really do wonder what today’s exercise proved to the issuers of my CDL. I’ve had the license for 35 years. I should know about road signs. Even the trucking theory and practice questions were barely relevant.

I kid you not; this is an actual question from the test: “What should a driver look for when inspecting an air compressor drive belt? The choices were: fraying; cracks; cuts; all of the above. In all the years I’ve been driving, I’ve never seen a drive belt on an air compressor, but I guessed correctly.

I think it’s safe to say I know a lot more than any written test could ever reveal, but I’ve run across drivers with several years in the left seat who still do not know, for example, how to slide their fifth-wheel or trailer axles, or load a trailer to balance the weight across the axles.

And that begs the question, how do drivers progress in their knowledge of the craft of trucking? Most of what they should have learned in driving school, or over the hours in the cab riding along with Dad or Uncle Floyd, could safely be called “the basics.” There’s little if any advanced driver training out there, and even if there was, return on the investment would be poor because it wouldn’t improve your pay grade or discount your insurance.

You might not need to ask as many embarrassing questions, like how much weight shifts when you slide the fifth wheel, or how to unstick a frozen brake drum. But that’s stuff you’re somehow just supposed to know.

I’m glad pilots don’t rely on the grapevine to learn stuff like how to restart a flamed-out engine or how to determine the glide slope when the instruments fail.

I’ve met a few drivers over the years with several million miles behind them. That in itself suggests they are doing something right, but I have found that more than a few of these fellows don’t “know” a lot about trucks and trucking. They may have managed to avoid knocking anything over in their 20 years of driving, but they don’t seem to have 20 years worth of accumulated knowledge about trucking or the expertise you might expect from a veteran in some other profession.

It’s also hard to say whether good judgment, good skill or good luck kept them out of trouble all that time. It’s quite likely that many of them have simply never found themselves in a situation that called for any, all or either of the above. Does that driver have 20 years of experience of a year’s worth of experience 20 times?

Driver by Wire

It’s interesting that many of the so-called soft skills that the best drivers had years ago are fading into irrelevance, like downhill braking, collision avoidance, traffic and speed management, traction management in slippery conditions, fuel efficient driving techniques, etc. Most of those skills are now automated today. Sure, automation makes it easier bring entry-level drivers up to a point where they can handle most of what the world will toss at them today, but where will they be if they had to think for themselves?

The question being asked in commercial aviation circles today is whether today’s pilots are real aviators or just systems management people with a couple of stripes on their shoulder. Several recent incidents (over the past decade) have called pilots’ actual flying skills into question. For example, the crash of the Bombardier Q400 aircraft near Buffalo, N.Y. and the very well publicized disappearance of the Air France flight 447, a highly-automated Airbus A330 that literally fell out of the sky into the Atlantic ocean while the pilots watched their computer systems unravel right before their eyes. In both cases, investigators cited a lack of pilot knowledge and skill contributed to the crashes.

Luckily for the folks aboard the USAir flight that landed in the Hudson River a few years ago, that pilot still knew how to fly an airplane.

There’s talk in aviation circles now about requiring pilots to make a certain number of manual landings and take-offs each month just so they will maintain their basic stick-and-rudder flying skills.

With trucking now riding a similar wave of automation — we’re told it’s about enhancing safety but we can’t ignore the fact that it’s simply cheaper to not to so extensively train new drivers — I’d urge caution in allowing those basic driving skills to atrophy.

Unfortunately, officials in North America don’t do a very thorough job of investigating truck crashes. If they did, I believe we’d see driver error attributed to a lot more incidents where the truck driver is deemed at fault. It would be very revealing to discover what the driver did wrong, or didn’t do at all. This, I believe, would make a very strong case for better basic and advanced driver training rather than just heaping more automation into truck cabs.

If you have a few minutes, check out the two clips below to learn how much pilot error contributed to the Air France crash. The allegedly atrophied skills referred to are skills that every pilot learns within the first five hours of pilot training. Apparently, those skills are seldom called upon anymore. The consequences of forgetting the basics can be tragic.

Final Air France crash report says pilots failed to react swiftly

Controversy over AF447 transcript release

Avatar photo

Jim Park was a CDL driver and owner-operator from 1978 until 1998, when he began his second career as a trucking journalist. During that career transition, he hosted an overnight radio show on a Hamilton, Ontario radio station and later went on to anchor the trucking news in SiriusXM's Road Dog Trucking channel. Jim is a regular contributor to Today's Trucking and Trucknews.com, and produces Focus On and On the Spot test drive videos.

Have your say

This is a moderated forum. Comments will no longer be published unless they are accompanied by a first and last name and a verifiable email address. (Today's Trucking will not publish or share the email address.) Profane language and content deemed to be libelous, racist, or threatening in nature will not be published under any circumstances.