HILL-START ASSIST

Volvo’s Hill Start Assist option for the I-Shift transmission isn’t entirely new, but it seems not to be well known. Available on VN, VT, and VHD trucks, it deals with the time lag seen on all automated manual transmissions between release of the brake pedal and driveline
engagement. That lag means the truck will roll back some distance if it’s starting on a grade, however slight.

The Hill Start Assist option will reduce or prevent such rolling back and the safety risk it represents. The feature can also provide reduction of driveline component damage by
minimizing shock loads during start-up on a hill.

It works by applying the vehicle brakes when in a forward gear and starting on an incline, or in a reverse gear starting on a decline, enabled by a dash-mounted switch. When it’s switched on, Hill Start Assist automatically activates when the truck is at a complete stop with the brake pedal fully engaged and the truck is in gear, forward or reverse. The triggering factor is the release of the brake pedal. Once Hill Start Assist is activated, the brakes are applied for up to three seconds or until the accelerator is pressed, whichever occurs first.

The feature is not available with vendor transmissions, of course, nor when the truck’s equipped with Meritor Wabco ABS or the basic instrumentation package.


Have your say


This is a moderated forum. Comments will no longer be published unless they are accompanied by a first and last name and a verifiable email address. (Today's Trucking will not publish or share the email address.) Profane language and content deemed to be libelous, racist, or threatening in nature will not be published under any circumstances.

*

  • We have a 2016 volvo and the hill assist is not releasing the brakes after 3 seconds it is taking 20-40 seconds for them to release. That is very dangerous in traffic. Some times just sitting with your foot lightly on the brake it will apply more pressure and not release right away.

    • Hi Jacki. I have too 2016 volvo with same simptoms. Hill assists not release the brakes or release not completely. Maybe You’re fixed that issues. Any ideas or information will be much appreciated. Thanks.